unicorn g code extension for inkscape download

We installed repetier host to send the Gcode but here we got stuck for this assigment we were not able to connect the machine. We downloaded the frirmware for the RAMBo board and used arduino IDE to send it to the board. svg remember to convert text objects to a path. Parallel to builing the machine we needed a way to generate a Gcode from a 2D drawing, our plan was to draw someting in Inkscape and then send it to the machine. this was with the firmware from the 3D printer.ĭrawing robot from Lennard Ameys on Vimeo. To check if every part was on the right place with enough slack on the part we were able to let the x-axis and the Y-axis move manually with the LCD screen. Now is the part were it became very difficult for us. We connected everything on the right place and tested the movement of the axises with the LCD We used 2 motors and 2 endstops. We used a mini RAMBo 1.3 board for this assigment. When all the parts where ready i started to assemble the machine. We printed them on a ender 3 with the following settings:Īt first I did 2 prints with a infill of 30% but one of the parts broke when I inserted the steel rod. I designed the parts to 3D print them later. We did this to know the dimensions and which parts we needed to manufacture.Īfter the quick and dirty prototype was finisched and more or less fuctional I started designing the different parts in fusion360 He dismanteled this machine and looked for the parts we needed.:īefore manufacturing the parts lennard prototyped the machine with wooden parts. Lennard had an old prusa printer we used for parts. This week, and after some brainstorming we decided to make a 2D drawing machine.

Unicorn g code extension for inkscape download